hearinglooporg pic of meeting room loop system
best HLRIII Induction Loop Receiver Headset pictureHLRlll Induction Loop Receiver Chargerbest HLRIII Induction Loop Receiver Headset pictureHLRlll Induction Loop Receiver ChargerIf You Can't Hear What's Being Said Please Request A Headset signspool of 20 guage wireHearing Loop Installed Switch hearing aid to T-coil_hearingloop org picFemale XLR to 3.5mm Adapter Cable3.5mm M to M patch cordinloop1600_front

Meeting Room Loop System – Covers 50 to 170 seats

Includes one Loop Listener Receiver Headset for every 100 seats

User Group Hotels, Politician Constituency Offices, Public Venues, Workplaces

Product Description


  • Sarabec, Oval Window, or InLoop Digital hearing loop amplifier
  • up to 200’ (61m) 18 – 20 ga antenna wire
  • Analogue and/or Built-in Digital to Analog Converter (inloop)
  • (2) Loop Listener Receiver Headsets (one / every 100 seats)
  • (2) 3.5mm stereo to 3.5mm mono adapters for headsets
  • (2) Loop Listener Chargers; (2) rechargeable batteries; (2) alkaline batteries; carry case, cleaner, and cloth
  • Sign – “Hearing Loop Installed”
  • Sign – “If you can’t hear what’s being said, please request a headset”
  • 3.5 mm Male to Male mono 2 conductor, 1.5 ft. (46cm) – to connect sound source to amplifier
  • Connector cable to existing sound board / PA system – 1/8” (3.5mm) to Female XLR Audio Cable
  • Installation instructions
  • Training guide / job aid

Recommended additions if connecting hearing loop to a TV:

  • 6′ (1.8m) Coax and optical cables
  • 39” (1m) corded, electret microphone, 3.5mm mono jack, with Velcro fastener – if TV has no independent Audio output setting
  • Lip-Sync Corrector if there is a noticeable delay in audio between person on TV speaking, and hearing their words (check TV operating manual for a built-in delay for the signal at the Audio output jacks)
  • 6′ (1.8m) Coax cable if no TOSLink input – use if TV has a single orange RCA jack
  • RCAx2 cable, 6′ (1.8m)

Recommended additions if connecting amplifier to corded microphones:

  • Y-split cable extension for conference microphone to loop amplifier – if using 2 mics; if greater than 3 speakers at one table
  • 3.5mm stereo to 3.5mm mono adapter – at amplifier

Recommended Microphone Systems:

  • Samson Airline Wireless Microphone system, with lapel mic – if no existing microphones, or only ‘Dynamic’ type mics
  • Samson headset microphone (replacing lapel mic) – brings speakers’ voice closer
  • Conference microphone, 3.5mm jack plug, 3’ cord (1 mic per every 3 sitting speakers)
  • Recommended:

  • Extra antenna wire – up to 500’ (152m), if wire placed at ceiling having dimmer switches, pot lights, or metal
  • System installation


Amp Dimensions 6"x4"x2" (15x10x5cm)
Amp Weight 3 lbs (1.4 kg)
Warrantee Lifetime warrantee, excluding damage or failure caused by misuse, neglect, or excessive electric current or voltage fluctuations
Approvals CE, FCC
Colour Black
Power Supply 64 Watts
Controls Master volume and tone controls with 3 individually controlled inputs 1 analog audio line input. 1 microphone input with optional phantom power. 1 coax or optical digital input with selector switch.
Adapter 19 volt 3.4 amp
Inputs 1 3.5mm jack analog audio Line input for direct connection to a TV sound output using RCA patch cord; 1 3.5mm mono jack Microphone input with optional phantom power, for DC powered for electret microphone; 1 coax or optical digital input with selector switch
Output Connections Terminals with tighteners for antenna wire or (optional) loop pad
Standard Equipment Built in Digital to Analog Converter; 200′ (61m) of antenna wire 6’ (15cm) digital coax cable 6’ (15cm) digital optical cable
Indicators 1 - Red LED for Power On indication 1 - Red LED for Inputindication 1 - Red LED for Loop Level strength indication
Amp Coverage Area Up to 1600 sq ft (148 sq m)