spool of 20 guage wirebest HLRIII Induction Loop Receiver Headset pictureHLRlll Induction Loop Receiver ChargerHearing Loop Installed Switch hearing aid to T-coil_hearingloop org picIf You Can't Hear What's Being Said Please Request A Headset signRCA TV patch cablesTOSLink Digital_Optical cable 3ft.Inloop 600 Digital Amplifierunivox_dls50 amp_smaller

Doctor’s Office Hearing Loop System

For areas up to 800 sq. ft. (74 sq. m)

User Group Audiologists & Hearing Aid Dispensers, Doctors' Offices

Product Description

Note: If TV’s volume is off, there is no need for Lip-Sync Corrector

  • InLoop Digital 600 amplifierorUnivox DLS-50 amplifier
  • up to 150’ (45m) 20 ga antenna wire
  • Built-in Digital to Analog Converter (inloop system)
  • 6″ (15cm) TOSLink Optical cable
  • Loop Listener Receiver Headset
  • 3.5mm stereo to 3.5mm mono adapter for headset
  • Loop Listener charger & rechargeable battery & alkaline battery, carry case, cleaner, & cloth
  • Sign – “Hearing Loop Installed”
  • Sign – “If you can’t hear what’s being said, please request a headset”
  • RCAx2 cable, 6′ (1.8m)
  • Installation instructions
  • Training guide / job aid


Recommended additions for patient / doctor confering:
Microphone appropriate to need – stationary or wireless

Recommended additions for TV viewing:

  • Coax cable for TV with single RCA jack
  • Electret microphone – if TV has no independent Audio output setting
  • Lip-Sync Corrector if is a noticeable audio delay
  • Cable connect from sound source to amplifier
  • Extra antenna wire – up to 200’ as needed
  • System installation


Amp Dimensions 6"x4"x2" (15x10x5cm)
Amp Weight 3 lbs (1.4 kg)
Warrantee Lifetime warrantee, excluding damage or failure caused by misuse, neglect, or excessive electric current or voltage fluctuations
Approvals CE, FCC
Colour Black
Power Supply 24VA
Inputs 1 3.5mm jack analog audio Line input for direct connection to a TV sound output using RCA patch cord; 1 3.5mm mono jack Microphone input with optional phantom power, for DC powered for electret microphone; 1 coax or optical digital input with selector switch
Controls VOLUME control and TONE control Individual volume controls for all Three inputs - Microphone, Line, and Digital
Output Connections Terminals with tighteners for antenna wire or (optional) loop pad
Standard Equipment Built in Digital to Analog Converter; 150′ (45m) of antenna wire 6’ (15cm) digital coax cable 6’ (15cm) digital optical cable
Indicators 1 - Red LED for Power On indication 1 - Red LED for Inputindication 1 - Red LED for Loop Level strength indication
Amp Coverage Area Up to 800 sq ft (74 sq m)